Project

General

Profile

Testing cameras for the compatibility with Automarshal system

For the effective camera use with Automarshal number plate recognition system, the following conditions must be met:

First, the camera must satisfy the requirements for the recognition. In particular, camera should have:

  • The ability to set fix exposure time of 1/250 seconds, 1/500 seconds, 1/1000 seconds, or be able to limit the exposure to eliminate a blur in the image due to vehicle movement.
    If the camera has only the ability to control a shutter speed, to perform the reliable recognition, the vehicle most probably will have to stop in the recognition zone for 2-3 seconds.

  • The functionality for automatic adjustment of shutter speed. This functionality is highly desirable for the reliable system operation. In addition, automatic adjustment of shutter speed must be available for activation when the fixed exposure time is chosen. In the list of technical characteristics of a camera, this functionality is often indicated as DS Iris, Auto-Iris, P-Iris, etc. (Please refer to your supplier or manufacturer for more information).
    If this functionality is absent, additional illumination of recognition area will be required during night time.

  • The following functionality for performing recognition in the night time: BLC (backlight compensation – for instance, when vehicle enters the open gate), HLC (headlight compensation), WDR (this functionality allows to take images at different shutter speeds and then combine all taken images in a single image. This also helps when headlights and backlights flood the image).

Second, the cameras must be set for the recognition algorithm:

  • The following settings are universal for the video stream: 1280x720 resolution, the highest available quality of the video, i-frame interval value: 10, bit rate type – data rate type: variable (VBR), maximum stream: 4096, frame rate: 25.

  • In the image settings, the following parameters need to be changed: change brightness to 60, set sharpness between 0 to 10, set gain between 0 to 20, set manual shutter speed to 1/500, 1/750 or 1/1000 – depends on the available lighting and vehicle movement, deactivate 2DNR, set 3DNR into Auto mode, set average values for WDR and HLC, select Auto, P-Iris, Auto-Iris or DC-Iris for the Iris settings. When setting Iris, please make sure that fixed shutter speed has not changed its value. If there is no option for automatic adjustment of Iris settings, one can select automatic adjustment of shutter speed by selecting the highest available value as for manual exposure.

Choosing and testing video cameras for the compatibility with Automarshal

In the following list the compatibility of the cameras is classified based on a 5-point system, where 5 is assigned to a recommended camera and 1 – for incompatible camera.

5 – Recommended. Are the cameras that at the present moment are utilised by our clients and show good performance.
4 – Compatible on condition. For the correct operation, couple of conditions must be met (e.g. vehicle must stop in recognition area, installation of additional illumination, etc.).
3 – Theoretically compatible. Cameras are theoretically compatible based on technical requirements, but have not been tested for everyday operation.
2 – Poorly compatible. Cameras are not a good fit for recognition of number plates.
1 – Incompatible. Cameras are incompatible based on technical requirement for number plate recognition, or no longer in production.

3svision

3s Vision N6033 – theoretically compatible. Up to 5-7 meters. No information about operation for automatic adjustment of shutter speed.
3s Vision N6037 – theoretically compatible. Up to 5-7 meters. No information about operation for automatic adjustment of aperture.

AceCop

ACV-722MPXIP – incompatible. Poor low light sensitivity.
ACV-723MPXIP – incompatible. Poor low light sensitivity.

ActiveCam

ActiveCam AC-D2143IR3 – incompatible. No information about exposure, poor low light sensitivity.
ActiveCam AC-D2101IR3 – incompatible. (3.6 mm lens)
ActiveCam AC-D211IR3 – incompatible, low-range prime lens. (3.6 mm lens)

Acumen

AiP-K34N-A7Y2B – incompatible, poor low light sensitivity.
AiP-L24V-66Y2B – incompatible, no longer in production.

Altcam

ICV24IR – theoretically compatible for the recognition of the vehicles at a distance of 8 meters. Most likely would require additional illumination.

Alteron

KIB90 – theoretically compatible. Suitable for applications when the vehicle stops for 2-3 seconds in recognition area (at a maximum distance of 8-10 meters).

AVTech

AVM552CH – theoretically compatible. Suitable for applications when the vehicle stops for 2-3 seconds in recognition area (at a maximum distance of 8-10 meters).
AVM561H – compatible on condition. Suitable for the recognition of the vehicle at maximum distance of 50 meters. Most likely would require additional illumination.

Axis

Axis P1343 – incompatible. No longer in production.
Axis P1354-E – incompatible. No longer in production.

Axis P3225-LIVE Mk II – incompatible. Poor low light sensitivity.
Axis Q1614-E – recommended. (This camera is on the list of the cameras that we recommend)
Axis Q1765LE – recommended. For the distance between 5 and 50 meters.
Axis Q1765LE PT – recommended.

CVS

Ipark 3-7 HD – incompatible.

GeoVision

GV-IP UBL2401-0F – incompatible.

GTvs

GTI-33WVIR – incompatible. No longer in production.
GTI-34WVIR – incompatible. No longer in production.

Dahua

IPC-HDW1220SP-0360B – incompatible. (The camera has prime 3.6 mm lens)
IPC-HFW2320RP-ZS – incompatible. (Fixed aperture)
IPC-HFW1300SP-W-0360B – incompatible (Prime lens)
IPC-HFW2320RP-VFS – incompatible. (Fixed aperture; in some cases, aperture has low performance)
DH-IPC-HFW5221EP-Z – incompatible. Unknown compatibility for automatic adjustment of aperture.

DH-IPC-HFW5421EP-Z – incompatible. Unknown compatibility for automatic adjustment of aperture.

IPC-HFW5421E-Z – compatible on condition. Suitable for distance up to 10 meters. May require additional illumination.
DH-IPC-HDPW1220FP-S-0280B – incompatible due to small focal length f=2.8.
DH-IPC-HFW1420SP-0360B – incompatible. Prime 3.6 mm lens. There is no for automatic adjustment of aperture.

ESVI

EVC-ZM60-S20-P – theoretically compatible. Suitable for the recognition of the vehicles at a distance of up to 10 meters when the vehicle stops in the controlled area for 2-3 seconds. Most likely would require additional illumination for night time operation.

E-vidence

Evidence Apix Box / M1 – incompatible. No longer in production.
Evidence Apix – 18ZBox / M2 – incompatible. No longer in production.
Apix-Bullet/E2 NT 2812 – incompatible. No longer in production.

Flir

CB-6204 – theoretically compatible. Suitable for the recognition of the vehicles moving at a speed of 30 km/h at a distance of 6 meters. (For CB-6204-11-I – at a distance of 15 meters)

Beward

The camera and video settings are performed in Internet Explorer 9 or above browser.
For the video display, one needs to activate AxtiveX component from Beward.

B1510 – compatible on condition. Suitable for the recognition performed on a driveway with a width of below 6 meters. May require additional illumination for the night time operation. There are some issues with setting the aperture if the unit accidently loses power.
B1510RV – compatible on condition. Suitable for the recognition performed on a driveway with a width of below 6 meters. Requires additional illumination for nigh time operation.
B2710R – compatible. (For the lens with f=12mm, the recognition can be performed at a distance up to 10 meters; for the lens with f=16mm – up to 18 meters).
BD4680RVZ – compatible on condition. Motorised 3.0-9.0mm lens. Suitable for the recognition of the vehicles at a distance of up to 10 meters.
BD4680 – recommended.

BD4690RVZ – incompatible. No longer in production.
B2.980F – incompatible. No longer in production.
BD3730M-K12 – recommended.

B1210R – compatible on condition. (For the lens with f=12mm, the recognition can be performed at a distance up to 10 meters; for the lens with f=16mm – up to 18 meters)

Bosch

Bosch NBN-498-11p – incompatible. No longer in production.
Bosch NDN-50051-A3 – incompatible. Poor low light sensitivity.
Bosch NBN-71013-B – incompatible. Poor low light sensitivity.
Bosch NDN921 – incompatible.

Cantonk

Cantonk KIP-200R25A – incompatible. Prime 3.6 mm lens. Not adjustable aperture.

Idis

DC-B1203X – incompatible. Automatic adjustment of aperture is non-functional. The camera has the necessary port; however, it does not have menu for automatic adjustment of aperture.
DC-D3233HRX – theoretically compatible. Suitable for recognition at a distance of 8 meters and speed up to 120 km/h. Requires additional illumination.
DC-T3243HRX – compatible on condition. Suitable for recognition at a distance of up to 18 meters and vehicle speed up to 120 km/h
DC-T1244WR – compatible on condition. Suitable for the recognition at a distance of up to 18 meters and vehicle speed up to 120 km/h. For night time operation requires infrared lighting.

Ivideo

OP-2325F-SD – incompatible. Small focal distance of a lens.
OP-2220F-MSD – incompatible. Small focal distance of a lens.
OP-2220V-ASD – incompatible. Absent automatic adjustment of aperture. Aperture is not adjustable.

Itech

IPe-OP Starvis – theoretically compatible. Suitable for recognition at a distance of up to 22 meters. Camera does not have automatic adjustment of aperture; but it has high low light sensitivity. Most likely would require additional illumination.

Jassun

Jassun JSH-XV200 – theoretically compatible. Based on its description, the camera does not have automatic adjustment of aperture. Most likely, there will be issues with recognition during night time. For reliable recognition, vehicles may need to stop for 3-5 seconds in recognition area.

KAPKAM

KAPKAM KAM-2570 – incompatible. Prime lens.

KENO

KN-CE204V5050 – incompatible. The camera does not have automatic adjustment of aperture.

LiteTec

LiteTec LM IP313ck40 – compatible on condition. Requires additional illumination. Suitable for recognition at a distance of 8-10 meters.

Hikvision

Please note: automatic adjustment of aperture is only available for cameras of the fourth series

DS-2CD2012-I – incompatible. Prime lens.
DS-2CD2022WD-I – incompatible. Small focal length of the lens.
DS-2CD2022-I – incompatible. 4mm prime lens.
DS-2CD2032-I – incompatible.
DS-2CD2042WD-I – incompatible. 4mm prime lens.
DS-2CD2142FWD-IS – incompatible.
DS-2CD2642FWD-IZS – theoretically compatible. Suitable for recognition at a distance of 5-7 meters if the vehicle stops in the recognition zone for 3-5 seconds.
DS-2CD4012FWD-A – incompatible. No longer in production.
DS-2CD2522FWD-IS – incompatible. Prime lens of 2.8, 4 and 6 mm.
DS-2CD2522FWD-IWS – incompatible. Prime lens of 2.8, 4 and 6 mm.
DS-2CD2612F-IS – incompatible. No longer in production.
DS-2CD2622FWD-IS – recommended. Suitable for vehicle recognition at a distance of 5-10 meters.
DS-2CD2632F-IS – theoretically compatible. Camera has poor low light sensitivity. Requires additional (infrared) illumination.
DS-2CD2642FWD-IS – incompatible.
DS-2CD2820 – incompatible. No longer in production.
DS-2CD2T42WD-I8 – compatible on condition if the vehicle stops for 3-5 seconds in recognition area. Prime lenses 4, 6, 12 and 16 mm.
DS-2CD4025FWD-A – incompatible. No longer in production.
DS-2CD4A26FWD-IZHS – recommended. Suitable for the use at a distance of up to 18 meters (with f=8-32 mm lens).
DS-2CD4A25FWD-IZ – recommended. With 2.8-12mm lens, the camera is suitable for recognition at a distance between 5 and 10 meters. With 2.8-12mm lens – at a distance between 7 and 20 meters.

DS-520CD 2332i – incompatible.
DS-2CD853F-E – incompatible. No longer in production.
DS-2DE5220IW-AE – theoretically compatible. Suitable for recognition at a distance of up to 70 meters. Requires additional illumination.
DS-2CD2522F – theoretically compatible.

DS-2CD2522F(B) – theoretically compatible.

DS-2CD4625FWD-IZHS (8-32mm) – theoretically compatible. Suitable for the recognition at a distance of 25 meters.

HiQ

HIQ-6420H – compatible on condition. Suitable for the recognition at a distance between 5 and 7 meters if the vehicle stops in a control zone for 3-5 seconds.
HIQ-6440H – incompatible. The camera does not have fixed exposure setting.

HiWatch

HiWatch DS-N201 – incompatible. Small focal length of the lens.
HiWatch DS-I120 – incompatible. Prime lens.
HiWatch DS-I126 – compatible on condition. The camera does not have automatic adjustment of aperture.
HiWatch DS-I220 – incompatible. 4 and 6 mm prime lens.

LTV

LTV CNE-440 00 – compatible on condition. Suitable for recognition at a distance between 2 and 8 meters for the vehicles at a speed below 120 km/h.
LTV CNE-431 00 – incompatible. No longer in production.
LTV CNE-450 00 – incompatible. No longer in production.
LTV CNE-610 42 – incompatible. Has small focus distance; requires additional illumination.
LTV CNE-630 42 – incompatible. Has small focus distance; requires additional illumination.
LTV CNE-640 42 – incompatible. Has small focus distance; requires additional illumination.
LTV CNE-620 48 – incompatible. Camera does not have exposure.
LTV CNE-622 48 – incompatible. Camera does not have exposure.
LTV CNE-630 4G – incompatible. No longer in production.
LTV CNE-630 48 – incompatible. Obtained image by a camera is not sharp enough.
LTV CNE-630 42 – incompatible. Has small focus distance.
LTV CNE-631 42 – incompatible. Has small focal length. Requires additional illumination.
LTV CNE-631 48 – incompatible. Camera does not have exposure.
LTV CNE-631 4G – incompatible. Camera does not have automatic adjustment of aperture. Camera has poor low light sensitivity.
LTV CNE-640 48 – incompatible. Camera does not have exposure.
LTV CNE-820 48 – incompatible. No longer in production.
LTV CNE-831 42 – incompatible. Has small focus distance; requires additional illumination.
LTV CNE-830 42 – incompatible. Has small focus distance.
LTV CNE-850 48 – barely compatible. Suitable for recognition at a distance between 5 to 7 meters. Does not have automatic adjustment of aperture. Vehicle needs to stop in the recognition area for 35 seconds.
LTV CNE-910 42 – incompatible. Has small focus distance.

LTV CNE-920 48 – barely compatible. Suitable for recognition at a distance between 5 to 7 meters. Does not have automatic adjustment of aperture. Vehicle needs to stop in the recognition area for 35 seconds. Requires additional illumination.
LTV CNE-931 42 – incompatible. Has small focus distance. Requires additional illumination.
LTV CNE-930 48 – incompatible. Low quality of exposure processing.
LTV CNE-650 48 – barely compatible. Suitable for recognition at a distance of 5 to 7 meters. Requires additional illumination.

LTV CNE-230 24 – theoretically compatible. Suitable for recognition at a distance of up to 100 meters. Requires additional illumination.
LTV CNE-430 00 – barely compatible. Camera has poor low light sensitivity.
LTV CNE-450 00 – theoretically compatible.
LTV CNE-630 58 – barely compatible. Suitable for recognition at a distance below 5 meters. Requires additional illumination.
LTV CNE-650 58 – barely compatible. Suitable for recognition at a distance below 5 meters. Requires additional illumination.
LTV CNE-850 58 – barely compatible. Suitable for recognition at a distance below 5 meters. Requires additional illumination.

LTV-ICDM1-E6235L-F3.6 – incompatible. Has small focus distance.
LTV-ISDNI10-TM3 – incompatible. No longer in production.
LTV-ISDNO20-EM2 – theoretically compatible. Suitable for recognition at a distance approximately up to 100 meters. Requires additional illumination.

LTV CNL-620 48 – compatible on condition. Suitable for recognition at a distance between 5 to 10 meters. Requires additional lighting.
LTV CNM-610 48 – incompatible. Obtained image by a camera is not sharp enough.
LTV CNE-940 48 – theoretically compatible. Suitable for recognition at a distance between 5 to 7 meters. Requires additional lighting.
LTV CNE-840 48 – theoretically compatible. Suitable for recognition at a distance between 5 to 7
meters. Requires additional lighting.
LTV CNE-830 48 – theoretically compatible. Suitable for recognition at a distance between 5 to 6 meters. Requires additional lighting.
LTV CNE-750 18 – theoretically compatible. Suitable for recognition at a distance between 5 to 6
meters. Requires additional lighting.

Master

Nv-104-mr – theoretically compatible. Suitable for recognition at a distance up to 10 meters if the vehicle stops in the recognition zone for 2-3 seconds. Requires additional lighting.

Microdigital

MDC-N6290WDN-36HA – incompatible. No longer in production.
MDC-N6290WDN-42HA – incompatible. No longer in production.
MDC-N6290WDN-40HA – incompatible. No longer in production.
MDC-N6290TDN-24H – incompatible. No longer in production.
MDC-N6290TDN-42H – incompatible. No longer in production.
MDC-N6290TDN-40H – compatible on condition. Suitable for the recognition at a distance between 5 to 40 meters. Requires additional illumination.

MDC-i6090VTD-24H – incompatible. No longer in production.
MDC-i6290VTD-10H – incompatible. No longer in production.
MDC-i6290VTD-110H – incompatible. No longer in production.
MDC-i6291VTD-66H – incompatible. No longer in production.

MDC-L6290VSL-42(3.5~16mm)C.GRAY – compatible on condition. Suitable for recognition at a distance between 5 to 14 meters for the vehicles at a speed of up to 150 km/h.
MDC-L6290VSL-42A(2.8~12mm)C.GRAY – compatible on condition. Suitable for recognition at a
distance between 5 to 10 meters for the vehicles at a speed of up to 100 km/h. Requires additional source for illimitation.
L6290VSL-42HA (3.5~16mm) – compatible on condition. Suitable for recognition at a distance between 5 to 14 meters for the vehicles at a speed of up to 150 km/h.

MDC-L6290VTD-24H – compatible on condition. Suitable for recognition when vehicle stops in the recognition area for 2-3 seconds.

Mobotix

M24M-Sec-Night – incompatible. No longer in production.

NoVus

NVIP-2DN3001H/IR-2P – incompatible. No longer in production.

Optimus

Optimus IP-E012.1(2.8-12)P – incompatible. Camera does not have automatic adjustment of aperture.

Panasonic

WV-X6531N – theoretically compatible. Suitable for recognition at a distance up to 15 meters and for vehicles at a speed of up to 120 km/h.
WV-SPV781L – theoretically compatible. Suitable for recognition at a distance up to 150 meters and for vehicles at a speed of up to 120 km/h.

POLYISION

PN-IP1-B3.6 v.2.0.1. – incompatible. 3.6 mm prime lens. Most likely camera does not have automatic adjustment of aperture and ability to set fixed exposure.
PD1-IP1-B3.6 v.2.0.2 – incompatible. Dome camera. 3.6 mm prime lens. Most likely camera does not have automatic adjustment of aperture and ability to set fixed exposure.
PNL-IP2-V50PL – incompatible. Does not have automatic adjustment of aperture. Requires additional lighting for night time operation.
PS-IP2-Z20 v3.5.4 – incompatible. Does not have fixed shutter value. Impossible to set 1280x720 resolution. As a result, most likely, there will be issues with image processing.

ProfVideo

PV-IP21 – barely compatible. Issues with image processing due to exposure settings.

Proline

IP-WV2415PTZ10 – incompatible. No longer in production.

Rvi

RVi-IPC22DN with REV-1240AIR lens – compatible on condition. Suitable for recognition at a distance between 10 to 25 meters (for a drive way with a width up to 5 meters). Requires outdoor casing for the use at the outdoors. Requires additional illumination for night time operation.
RVi-IPC42 – incompatible. No longer in production.
RVi-IPC42DN – incompatible. No longer in production.
RVi-IPC42L – incompatible. No longer in production.
RVi-IPC42S (3.6 mm) – incompatible.

RVi-IPC43 – incompatible. No longer in production.
RVi-IPC43M3 – incompatible. No longer in production.
RVi-IPC43S – incompatible. Has small focus distance.
RVi-IPC44 (3.0-12) – incompatible. No longer in production.
RVi-IPC44-PRO – incompatible. Camera does not have fixed exposure setting.
RVi-IPC44-PRO V.2 – incompatible. Camera does not have fixed exposure setting.
RVi-IPC62Z12 – incompatible. No longer in production.
RVi-IPC42LS – incompatible. Has 3.6 mm prime lens.
RVi-IPC42LS 2.8-12 mm – theoretically compatible. Camera does not have automatic adjustment of aperture. Suitable for recognition at a distance between 5 to 7 meters. Requires additional illumination.

Samsung

Samsung SNB-6004P – recommended. Requires lens and outdoor casing.
Samsung SNZ-5200P – incompatible. No longer in production.
Samsung SNZ-5004P – incompatible. No longer in production.

Sectec

Sectec ST-IPC”MP4X-35S – theoretically compatible. Suitable for recognition at a distance up to 10 meters. Requires vehicle to stop at a recognition area for 3-5 seconds.

Smartec

ST-IPM3670/1 – incompatible. No longer in production.
STC-IPM3660 – incompatible. Camera does not have automatic adjustment of aperture and has fixed exposure of 3.6 mm.

Sony

Sony SNC-CH180 – incompatible. No longer in production.
Sony SNC-CH280 – incompatible. No longer in production.
Sony SNC-VB600 – incompatible. Has poor low light sensitivity.
Sony SNC-VB635 – recommended (in the list of recommended cameras)

Space Technology

ST-174 IP HOME – incompatible.
ST-182 IP HOME – theoretically compatible. Suitable for recognition at a distance up to 10 meters. Requires the vehicle to stop in a recognition area for 2-3 seconds.
ST-730 IP PRO – incompatible. No longer in production.
ST-900 IP (version 2) – theoretically compatible. Suitable for recognition at a distance up to 80 meters. Requires additional illumination.

Specvision

SVI-642MW – incompatible.
SVI-DVI-612N – incompatible.
SVI-652V – incompatible. Camera does not have automatic adjustment of aperture and fixed exposure.

SVIP-432V – incompatible. Camera does not have automatic adjustment of aperture.

Tantos

TSi-P212V – incompatible.
TSi-Pe2VP (2.8-12) – incompatible. No longer in production.
TSi-Pm211F (3.6) – incompatible. Prime lens.
TSi-Ple2VPZ (2.8-12) – incompatible. Camera does not have automatic adjustment of aperture.
TSi-Ple2VPA (2.8-12) – incompatible. Camera does not have automatic adjustment of aperture.
TSc-PL960HV (2.8-12) – incompatible. No longer in production.
TSi-Vle2VPZ (2.8-12) – incompatible. Camera does not have automatic adjustment of aperture.
TSi-Pm451V (3-12) – theoretically compatible. Based on Tantos technical support, automatic adjustment of aperture is independent from exposure time.
TSi-Pm231V (3-12) – incompatible. No longer in production.
TSi-DV451V (3-12) – theoretically compatible. Based on Tantos technical support, automatic adjustment of aperture is independent from exposure time.
TSi-DV231V (3-12) – theoretically compatible. Based on Tantos technical support, automatic adjustment of aperture is independent from exposure time.
TSi-Ple2VP (2.8-12) – incompatible.
TSi-Ple2VP (5-50) – theoretically compatible. Suitable for the recognition at a distance between 5 to 30 meters. Requires the vehicle to stop in recognition area for 3-5 seconds.
TSi-SDW211Z22 – incompatible. No longer in production.
TSc-PL960HV (2.8-12) – incompatible. No longer in production.
TSc-Ple23VP (2.8-12) StarLight – incompatible. Camera does not have automatic adjustment of aperture.
TSi-Ple1F - incompatible. Camera does not have automatic adjustment of aperture.

TANGSUN

Unknown camera model – incompatible.

Zavio

Zavio B7210 – incompatible (lens up to 9mm).

Other

IPe-O 1.3 Aptina 5-50 – theoretically compatible, but is not recommended.
ACTi KCM-5211 – incompatible. No longer in production.
Avigilon 2.0 vp
GRUNDIG GCI-K1555Z – incompatible. No longer in production.
HLC-79CD/H – incompatible. Camera does not have automatic adjustment of aperture and ability to set fixed exposure.
HitElectronics – incompatible.
IPC-HFW1300S – incompatible. Prime lens.
Infinity TPC-2000XR 3312 – compatible on condition. Requires the vehicle to stop in recognition area for 3-5 seconds.
Moxa VPort 56-2MP – incompatible. No longer in production.

NOVIcam N12W – incompatible.
Praxis PB2013 L-2.8-12 – incompatible. Camera does not have automatic adjustment of aperture and ability to set fixed exposure.
TVC-7031 – incompatible. No longer in production.
TVC-7051 – incompatible. No longer in production.
PM-1080IP – incompatible. Camera does not have automatic adjustment of aperture.
Veacam VC-V30L4P – theoretically compatible. Requires vehicle to stop in recognition area for 3-5 seconds. Suitable for recognition at distance between 5 to 7 meters with 2.8-12mm lens; 5 to 30 meters – with 5-30mm lens; 5 to 12 meters – with 6-22mm lens.
BarCam analogue – incompatible.
KAPKAM KAM-4880 – theoretically compatible. Suitable for recognition at a distance between 5 to 7 meters. Requires vehicle to stop in recognition area for 3-5 seconds.
IVue-IPC-OB30V2812-40PD – theoretically compatible. Requires vehicle to stop in a recognition area for 3-5 seconds.
PROXISCCTV PX-IP-BV40-P – theoretically compatible. Suitable for recognition at a distance between 5 to 7 meters. Requires vehicle to stop in recognition area for 3-5 seconds.
HTV-IP-T3031V- barely compatible. Camera does not have automatic adjustment of aperture; it requires additional illumination.
Honeywell HBD3PR2 – incompatible. No longer in production.
TBK-93 (SNZ-6320) – incompatible. Poor low light sensitivity. Camera does not have automatic adjustment of aperture.
NDI-50022-A3 – theoretically compatible. Suitable for recognition at a distance up to 8 meters.
EVC-ZM60-S20-P – theoretically compatible. Suitable for recognition at a distance up to 10 meters. Requires vehicle to stop in recognition area for 2-3 seconds. Most likely requires additional illumination for the night time operation.
VL-NCB1212i – incompatible. Camera does not have automatic adjustment of aperture.
CVS Ipark 3-7 HD – incompatible.